CHENFENGIntelligent Control

Company

Who you are buying from

Chenfeng Intelligent Control Co., Ltd. is an independent supplier of industrial automation spare parts and process instruments, based in Wuhan, China, and trading since 2014. 79 model numbers are cataloged on this site; the stock list behind them is larger and changes every week.

In short

Chenfeng has supplied automation spares and process instruments from Wuhan since 2014: one warehouse, tested before packing, dispatched within 48 hours, and sold with a 12-month functional warranty of our own.

  • 2014Trading since
  • 5Product groups
  • 5Main regions
  • 48 hDispatch on stock

01 · What we supply

Five product groups, sold by part number

We buy, hold and ship the parts that keep a line running: controllers and I/O that the OEM has moved on from, drives that are two generations behind the catalog, transmitters and analyzers that are still in service fifteen years after installation. Buyers come to us with a model number, a photo of a nameplate, or a failure report — not with a wish list.

Fourteen manufacturers are covered. We are not tied to any of them, so the recommendation follows the application rather than a franchise agreement.

If a number is not cataloged here, it is usually still findable. Send it to the quote desk before you conclude it is gone.

02 · The company

Since 2014 — and what changed

The company started in 2014 as a trading desk for MRO spares: the parts a plant needs when a line is down and the manufacturer has already retired the product. That is still the center of the business.

What changed is what sits behind the answer. The stock is ours, on shelves in Wuhan, not a listing forwarded from a marketplace. Every unit is tested in the same building it is picked from, so a failed unit is replaced from the next shelf instead of being shipped back across the city. Every dispatch leaves with a written test record, and every order has one person's name attached to it. None of that is unusual in Europe or North America. In this segment of the Chinese market it is still not the norm, and it is the reason buyers come back.

We are an independent supplier. We are not a manufacturer, we are not an authorized distributor, and we do not sell the manufacturers' warranty. We sell a tested unit, a condition stated in writing, our own 12-month functional warranty, and a named person who answers when something fails.

03 · The team

Three roles, one owner per order

There is no call center and no ticket queue. An order passes through three desks, and one of them owns your file from the first email to delivery.

  • 01

    Selection and substitution

    Reads the nameplate photo, checks the order-code suffix, and states whether the successor part is a drop-in or needs a wiring change, a firmware load or a different terminal block. The answer is written down, so you can forward it to your engineer instead of re-explaining it.

  • 02

    Export documentation

    Builds the commercial invoice, packing list and certificate of origin, applies the preferential tariff form where the goods actually qualify, and answers the customs questions that arrive three days after the box has left.

  • 03

    Logistics and dispatch

    Books the carrier, packs to the standard on the shipping page, photographs the sealed carton, and sends the tracking number the same working day.

Working hours are 09:00–18:00 CST (UTC+8), Monday to Friday. Inquiries that land after 17:30 are answered the next working morning — which for a buyer in Europe or North America is still inside their own working day.

04 · Warehouse and test bench

One building in Wuhan: shelves, bench, packing table

Stock is held in Hongshan District, Wuhan — in the same building as the test bench and the packing table. That is deliberate. A unit that fails its test is replaced from the next shelf without a courier being involved, and the packing standard is enforced by the people who also own the fault rate.

Each receipt is logged with model, order-code suffix, serial number and shelf location. Boards stay sealed in anti-static bags; instruments keep their process connection caps until the moment of packing. Counts are reconciled weekly, and the status shown on a model page — in stock, in transit, to be sourced — is the status the sales desk works from, not a marketing label.

What we test, and how

Bench procedure, applied to every unit offered as functional
TestHow it is doneWhat is recorded
Incoming checkModel, suffix and quantity against the supplier's packing list; serial captured before the unit goes to a shelf.Receipt date and shelf location, against the serial.
Visual inspectionHousing, terminals, connector pins, display window, label legibility, signs of heat, corrosion or previous repair.A photo set per unit. A defect rejects the unit rather than being noted and shipped.
Power-onEnergised at the rated control voltage, run to ready state, self-diagnosis and status LEDs checked.Pass or fail, and the supply voltage used.
Functional I/ODigital and analog points exercised where the module type allows: inputs read, outputs driven into a load.Points tested and results.
Analog loop4–20 mA output driven and read back with a loop calibrator where the device supports it.Two-point reading, before and after adjustment.
CommunicationsPort check against a test peer for the protocol the unit supports, where a peer is available.Protocol tested and result.
Operator panelScreen, backlight and touch response on HMIs and panels.Pass or fail, plus any dead pixel or soft area found.
Final packUnit bagged, connectors capped, packed with the packing list and photographed before the carton is sealed.Photo file, kept with the order.

What the test record contains

One page, signed, inside the carton: model and serial, date, supply voltage used, the points tested, the measured values, and the initials of the person who ran the bench. It is a dispatch record, not a calibration certificate — see the limit below.

05 · Limits

What we do not do

Buyers find these out eventually. It is faster if we say them here.

  • We do not issue ISO/IEC 17025 calibration certificates. Instruments are verified for function and loop output; a traceable calibration certificate comes from an accredited calibration laboratory, not from a parts supplier.
  • We do not run burn-in beyond the functional run in the table above. If your procedure needs a 24–72 hour soak test before acceptance, ask for it on the quote — it is priced separately and it moves the dispatch date.
  • We do not flash firmware to your plant version unless you supply the file and confirm the procedure in writing. A wrong firmware load bricks a controller, and that risk belongs with whoever owns the plant standard.
  • We do not have a warehouse outside China. Every unit ships from Wuhan, and the transit times published on the shipping page are the real ones.
  • We do not call a part "new" when it is new surplus in opened packaging. The condition is stated in writing on every quote, in one of four categories.
  • We do not claim to be an authorized distributor of any brand named on this site, and we do not use their logos.

06 · Markets

Where the boxes go

Most shipments go to five regions: Europe, North America, Southeast Asia, the Middle East and South America. We do not print a country count on this page, because the number moves every quarter and a number nobody can check is not evidence. If your compliance file needs to know whether a specific part has shipped to your country before, ask — we will tell you, including when the answer is no. We ship elsewhere on request — send the part number and we will quote carriage.

EXW, FOB, CIF, DAP and DDP are all quoted, under Incoterms 2020. DDP needs your tax or importer number before it can be priced. The terms, the reference transit times and the document list sit on one page rather than in an attachment.

Shipping & payment terms

07 · Working with us

How an order runs

  1. Step 1

    Send the list

    Model numbers, quantities, destination country and the date you need it. A nameplate photo is worth three lines of description.

  2. Within 4 working hours

    We confirm the number

    Order-code suffix, condition, and whether we hold it. If the suffix you sent does not exist, we say so instead of shipping the nearest thing.

  3. Same reply

    Proforma invoice

    Price, incoterm, lead time, warranty and the document list on one page. Stock prices hold for 7 days; sourced prices for 3.

  4. 48 hours

    Dispatch

    Stock items leave within 48 hours of cleared payment. Tracking number and packing photos go out the same day the carton is sealed.

  5. 12 months

    After delivery

    Warranty runs from the invoice date and follows the unit, not the invoice. Claims are answered within 2 working days.

Send a part list, get a costed answer.

One email is enough: model numbers, quantities and the country it ships to. You get availability, price, incoterm and the dispatch date in the same reply.

WhatsApp Request a Quote
WhatsApp