CHENFENGIntelligent Control

Cerabar, Promag, Levelflex and iTEMP instruments

Endress+Hauser parts and instruments

We supply Endress+Hauser field instruments and their spare parts, with stock concentrated on the transmitter and sensor families that appear most often on maintenance lists.

The range covers Cerabar and Deltabar pressure and differential transmitters, Promag flowmeters, Levelflex, Micropilot and Liquiphant level devices, and iTEMP temperature transmitters.

Because the model code encodes wetted material, process connection and approval, we quote from the full order code rather than the family name, and where a device is discontinued we identify the current equivalent and the adapter needed to fit the existing nozzle.

42 models
  • PMP71-AA21BA1HAAA Cerabar PMP71 gauge transmitter, 0–10 bar, 4–20 mA HART Endress+HauserCerabar
    In stock 48 h
  • PMD75-AAA7BA1HAAA Deltabar PMD75 differential transmitter, metal diaphragm, HART Endress+HauserDeltabar
    In transit 3–5 days
  • 5PBB25-AADABBAA0B1A Promag P electromagnetic flowmeter, DN25, PTFE liner, 4–20 mA Endress+HauserPromag
    In stock 48 h
  • 5WBB50-AADABBAA0B1A Promag W electromagnetic flowmeter, DN50, hard rubber liner Endress+HauserPromag
    In transit 3–5 days
  • FMR57-AAACCABDAX Levelflex FMR57 guided-wave level, 4–20 mA HART, rod probe Endress+HauserLevelflex
    In transit 3–5 days
  • FMU30-AAHEAAGGF Prosonic FMU30 ultrasonic level, 0–8 m, 4–20 mA Endress+HauserProsonic
    In stock 48 h
  • FTL51B-AAA4AAAAA Liquiphant FTL51B point level switch, tuning fork, relay output Endress+HauserLiquiphant
    In stock 48 h
  • TMT82-AAA1AA iTEMP TMT82 head transmitter, dual input, 4–20 mA HART Endress+HauseriTEMP
    In stock 48 h
  • TM411-A1A1A1AAA Omnigrad M TM411 RTD assembly with thermowell, Pt100 class A Endress+HauseriTEMP
    To be sourced 7–10 days
  • CPS71D-7AT21 Memosens pH electrode, digital, glass, 0–14 pH range Endress+HauserMemosens
    In stock 48 h
  • CLS82D-AA11 Memosens conductivity sensor, 0.04–500 mS/cm, hygienic design Endress+HauserMemosens
    In transit 3–5 days
  • CPS11D-7BA21 Memosens pH electrode, standard glass, 0–14 pH, BNC plug Endress+HauserMemosens
    In stock 48 h

Replacement questions we answer every week

These are the three questions buyers ask most often about Endress+Hauser spares. If yours is not here, send it with the part number and we will answer it in the quote.

My Cerabar order code is no longer valid. What replaces it?

The successor is usually in the same family with a changed electronics suffix. The process connection and diaphragm material stay the same, so the replacement fits the existing nozzle; what changes is the output option and the spare parts list. We map the old code to the new one before quoting.

Does a Levelflex replacement need a new weld-in adapter?

It depends on the probe version. Guided-wave probes with the same process connection reuse the existing adapter; a change of probe diameter or a switch to a different family usually needs a new one, and we list it as a separate line so nothing is missing on site.

Can I keep the housing and replace only the sensor?

On Memosens pH and conductivity the sensor is a separate part and the housing stays. On pressure and level transmitters the electronics and sensor are normally a single assembly, so the whole device is replaced and only the process connection is reused.

Need a Endress+Hauser part that is not listed?

Send the order code from the nameplate and the quantity. If it is obsolete we will tell you what replaced it, whether the successor fits the same slot, and what else has to change — instead of quoting a part that will not run.

A nameplate photo and the quantity is usually enough: email [email protected] or WhatsApp +86 182 0275 1913.

Not in the catalog? The same form sends it to a person — never to a 404.

WhatsApp Request a Quote
WhatsApp