CHENFENGIntelligent Control

Low-voltage drives, servo systems and AC500 controllers

ABB parts and instruments

We supply ABB low-voltage drives, servo equipment and PLC hardware as spares, with the emphasis on frames that are still installed but no longer current.

Stock covers ACS880, ACS580 and ACS355 wall-mount and cabinet drives, ACSM1 motion products with their motors, and AC500 controllers with their I/O.

The recurring problem is a drive that failed after ten years in service, where a direct replacement is obsolete and the cabinet cannot be rebuilt: we match frame size, option slots and control interface so the new unit fits the existing enclosure and wiring.

16 models
  • ABB AC500 CPU — representative photo PM583-ETH AC500 CPU with Ethernet, 2 MB program memory ABBAC500 CPUs
    In stock 48 h
  • ABB AC500 CPU — representative photo PM573-ETH AC500 compact CPU, Ethernet, 1 MB program memory ABBAC500 CPUs
    In transit 3–5 days
  • ABB S500 digital input module DC522 Digital input module, 16 channels, 24 VDC, screw terminals ABBAC500 CPUs
    In stock 48 h
  • ABB S500 digital output module DO524 Digital output module, 16 channels, transistor, 24 VDC ABBAC500 CPUs
    In transit 3–5 days
  • ABB ACS880-01 wall-mounted drive — representative photo ACS880-01-09A4-4 Wall-mount drive, 3 kW, 400 V, 9.4 A, built-in choke ABBACS880
    In stock 48 h
  • ABB ACS880-01 drive, 26 A — representative photo ACS580-01-026A-4 General purpose drive, 11 kW, 400 V, 26 A, assistant control panel ABBACS580
    In stock 48 h
  • ABB ACS580-01-05A7-4 ACS580 — stock photo ACS580-01-05A7-4 General purpose drive, 2.2 kW, 380–480 V, 5.7 A, frame R1, IP21 ABBACS580
    In transit 3–5 days
  • ABB ACS355-03E-08A8-4 ACS355 — stock photo ACS355-03E-08A8-4 Machinery drive, 2.2 kW, 400 V, 8.8 A, vector control ABBACS355
    In transit 3–5 days
  • ABB ACS880-01-145A-3 ACS880-01-145A-3 Wall-mount drive, 75 kW, 400 V, 145 A, for pump and fan duty ABBACS880
    To be sourced 7–10 days
  • ABB drive module — representative photo ACSM1-04AS-07A0-4 Servo drive, 7 A, 400 V, single-axis, with motion control option ABBACSM1
    In transit 3–5 days
  • ABB drive unit — representative photo PSTX170-600-70 Soft starter, 170 A, 208–600 V, bypass built in ABBPSTX
    In stock 48 h
  • ABB PSR105-600-70 PSR — stock photo PSR105-600-70 Compact soft starter, 105 A, 208–600 V, no bypass ABBPSR
    In transit 3–5 days

Replacement questions we answer every week

These are the three questions buyers ask most often about ABB spares. If yours is not here, send it with the part number and we will answer it in the quote.

The ACS880 frame is obsolete. What fits the same cabinet?

Usually the same frame size in a later revision, or the ACS580 where the application does not need direct torque control. We compare dimensions, cable entry, braking chopper and option slot layout before quoting, because a drive that fits electrically but not physically still costs you a cabinet rebuild.

Can I replace an ACS355 with an ACS580 without touching the motor cable?

In most cases yes, provided the current rating matches and the control interface is the same. The parameter set does not transfer directly, so we send the parameter list for the replacement and you re-enter it from the keypad.

What do you need with a drive inquiry?

The full type code from the nameplate, a photo of the unit and the fault code if the keypad still lights up. That is usually enough to tell you whether we have it, what the lead time is, and whether a repair is the better option.

Need a ABB part that is not listed?

Send the order code from the nameplate and the quantity. If it is obsolete we will tell you what replaced it, whether the successor fits the same slot, and what else has to change — instead of quoting a part that will not run.

A nameplate photo and the quantity is usually enough: email [email protected] or WhatsApp +86 182 0275 1913.

Not in the catalog? The same form sends it to a person — never to a 404.

WhatsApp Request a Quote
WhatsApp