Centum VP cards, EJA transmitters and ADMAG flowmeters
Yokogawa parts and instruments
We supply Yokogawa DCS cards, field instruments and analyzers as spares for Centum VP, CS 3000 and ProSafe systems that are expected to run for another decade.
Stock covers analog and digital I/O cards, node units and communication modules, EJA-E transmitters, ADMAG flowmeters and pH sensor families.
The problem here is rarely the card alone: a failed I/O card has to match the node configuration and the station software revision, so we quote against the card's style code and confirm the revision before shipping.
-
AAI143-S00 Analog input card, 16 channels, 4–20 mA, non-isolatedIn stock 48 h
-
ADV151-P00 Digital input card, 32 channels, 24 VDC, push-in terminalIn stock 48 h
-
ADV551-P00 Digital output card, 32 channels, 24 VDC, solenoid driveIn transit 3–5 days
-
ANB10D-425/CU2N Node unit for ESB bus, dual redundant, with CU2N coverTo be sourced 7–10 days
-
ALE111-S00 Ethernet communication module for Vnet/IP stationsIn transit 3–5 days
-
EJA530E-JBS4N-012EN EJA530E gauge pressure transmitter, 0–1 MPa, 4–20 mA HARTIn stock 48 h
-
EJA110E-JMS4J-912EN EJA110E differential pressure transmitter, 0–10 kPa, HARTIn transit 3–5 days
-
AXF050G-E1AL1L-BD41-01B ADMAG AXF electromagnetic flowmeter, DN50, PTFE, 4–20 mATo be sourced 7–10 days
-
PH8ERP-05-TN-NN-NN pH sensor, 5 m cable, PTFE junction, for process waterIn stock 48 h
-
DO30G-NN-10 Dissolved oxygen sensor, galvanic cell, 10 m cableIn transit 3–5 days
Replacement questions we answer every week
These are the three questions buyers ask most often about Yokogawa spares. If yours is not here, send it with the part number and we will answer it in the quote.
Does a Centum VP card have to match the station software revision?
It has to be compatible with it. The style code tells you which revision the card was built to, and a card that is too new for the station may not be recognized. Send the style code and the station revision and we will check the pairing before shipping.
Can an EJA-E transmitter replace an older E11 series unit?
Physically it will mount on the same bracket, but the process connection, range and output settings have to be re-specified. We quote from the full model code and confirm the range against your existing calibration sheet.
What is a style code and why do you ask for it?
The style code is the suffix that records the hardware and firmware revision of a Yokogawa card. Two cards can look identical and behave differently in the same node, so the style code is the only reliable way to quote a drop-in replacement.
Need a Yokogawa part that is not listed?
Send the order code from the nameplate and the quantity. If it is obsolete we will tell you what replaced it, whether the successor fits the same slot, and what else has to change — instead of quoting a part that will not run.
A nameplate photo and the quantity is usually enough: email [email protected] or WhatsApp +86 182 0275 1913.
Not in the catalog? The same form sends it to a person — never to a 404.