CHENFENGIntelligent Control

Policies · Warranty

Warranty Policy

Twelve months on function, on every unit we ship. Written to be read by a buyer, in the order a claim actually happens.

In short

Every functional unit carries a 12-month warranty; claims are answered within 2 working days.

  • 12 monthsFrom invoice date
  • 2 working daysFirst answer to a claim
  • Repair / replaceOr refund
  • OursReturn freight on valid claims
  • TransfersTo the end user

01 · Covered

What the 12 months covers

Twelve months from the invoice date, on function — which in practice means all of the following.

  • The unit does what its datasheet says it does, in the application it was sold for.
  • Failure under normal use is repaired or replaced at our cost, and we pay the return freight on a valid claim.
  • A unit that arrives dead on arrival is a warranty claim from day one. There is no argument about whether it was working when it left Wuhan — the bench record is the reference, and if the record and the unit disagree, the unit wins.
  • Boards, modules, drives, operator panels, transmitters and analyzers are covered on identical terms. There is no shorter warranty hiding on one product group.
  • The warranty attaches to the unit, not to the invoice. If you resell it, your customer is covered, and no registration is needed.
  • A replacement or repaired unit carries the remainder of the original term, or 90 days, whichever is longer.

Warranty runs from the invoice date rather than the delivery date, so it can be verified from a document both sides hold. If a shipment sits in customs for six weeks, tell us at the time and we will extend the start date to the delivery scan.

02 · Not covered

What it does not cover

The list is short and specific. It is not there to escape claims; it is there so that a genuine failure is not argued about by association.

  • Physical damage. Dropped, crushed, cracked housing, bent connector pins, a broken terminal block, a shattered display.
  • Incorrect wiring or wrong supply voltage. 24 VDC into a 230 VAC terminal, reversed polarity, a drive wired to the wrong motor winding, a module back-fed from the field side.
  • Liquid ingress. Water, coolant, hydraulic oil, washdown, or condensation from a process connection left uncapped in a humid plant.
  • Damage from the plant side. Lightning, surges, a short circuit downstream, a failed power supply feeding the unit, welding current through a shield.
  • Corrosion or contamination from an atmosphere the unit was not rated for.
  • Repairs or modifications by anyone other than us or a workshop we named in writing.
  • Consumables and wear parts. Batteries, fuses, lamps, backup supercapacitors, sensor cells and membranes, filter elements.
  • Use outside the rated specification — ambient temperature, IP rating, vibration, hazardous area classification.
  • Cosmetic wear that does not affect function: scuffs, faded labels, discolored plastic on a used unit.
  • Configuration and software. Lost parameters, a corrupted program, a firmware version that does not match your plant. We will help you reload it and send the file if we have it; it is not a warranty failure.
  • Anything after month twelve, however obvious the cause.

03 · Condition

Four conditions, and what each one is warranted for

The condition is stated on every quote and on the invoice. It is never left to a photo.

ConditionWhat it meansWarranty
New surplusUnused, in original packaging. May be old stock with a date code in the past.12 months, functional
RefurbishedCleaned, repaired where needed; the parts replaced are listed on the quote.12 months, functional
Used, testedPulled from service, run on the bench, cosmetic marks described in the listing.12 months, functional
For parts / untestedSold explicitly as non-functional, for spares recovery or repair by you.None — and this is the only category without one

If a quote does not state the condition, ask before you pay. It is a one-line answer and it should not be a surprise later.

04 · Claim process

Five steps, and what each one costs you in time

The clock starts when your email arrives with a serial number in it. Without a serial number the clock starts later, which is why step one is specific.

  1. Acknowledged in 1 working day

    Report it

    Email [email protected] with the model, the serial number, the invoice number, what the unit is doing and what it should be doing. A photo of the nameplate and a photo or short video of the fault code saves a round trip.

  2. Answer in 2 working days

    Triage

    An engineer reads it and replies with one of three things: a diagnosis, a request for two or three specific measurements, or an RMA number. If the fault is caused by wiring or supply, we say so at this stage rather than after you have paid the freight.

  3. RMA issued same day

    Return authorisation

    You get an RMA number and a return address. Do not ship before the number arrives: an unmarked parcel sits in customs while we work out who sent it. On a valid claim we pay the return freight — either we book the collection on our account or we reimburse the receipt.

  4. 3 working days after arrival

    Inspection

    The unit is opened and tested against the fault you described. You get a written finding: covered, not covered, or covered with a cause we can name — for example, a failed output driver with no sign of external damage.

  5. Dispatch within 48 h of approval

    Resolution

    Replacement leaves within 48 hours when the same model is in stock, otherwise within 30 days. If we cannot supply inside that window, you choose between a refund and a credit against another part.

Not a fault, and you have changed your mind? That is not a claim and it does not follow these five steps — change of mind is the shorter route, and the conditions are different.

05 · Remedy

Repair, replacement or refund — who decides

We choose the remedy, and we say which one in writing at the inspection stage, before anything is shipped back to you.

  • Replacement first when the model is in stock. It is the fastest route and it is the one we prefer.
  • Repair when the unit is rare, obsolete, or matched to a line you cannot change. We use the original part where we have it and state what was replaced.
  • Refund when neither is possible inside 30 days, or when the claim is valid and you would rather have the money. Refunds go back through the original payment method in the original currency within 10 working days of approval.

Freight on a refund

Outbound freight is refunded only when the unit was the wrong one or arrived damaged. If the unit was correct and failed in service, the warranty covers the unit and the return leg — not the original air freight. That is the same line most European distributors draw, and we would rather state it than negotiate it later.

06 · Sending it back

Freight, customs and the RMA number

  • Declare the parcel as defective goods returned for replacement, with the RMA number on the airway bill and on the outside of the box. We send a proforma invoice for the return so your broker has the paperwork.
  • Do not send a unit back as a sale. It will be assessed duty on entry, and the duty is yours to recover.
  • We do not accept freight-collect parcels. On a valid claim we give you an account to bill, or reimburse the receipt — whichever is faster where you are.
  • Original packaging helps but is not required. Pack it as if it were a new unit: transit damage on the way back is the one thing that turns a valid claim into an argument.

07 · Not a claim

Change of mind: sending back a unit that is not faulty

Nothing is wrong with the unit and nothing was wrong with what was shipped, so this is not a warranty claim and the five steps above do not apply. It is a return, and it has its own conditions.

  • 30 days from the invoice date, and the unit is unopened and unused. A unit that has been wired into a panel, configured to an address, or mounted on a DIN rail is none of those things.
  • An RMA number comes first, exactly as it does for a claim. Email the model, serial and invoice number; do not ship before the number arrives, and write it on the airway bill and on the outside of the box.
  • Freight both ways is yours. The outbound leg and the return leg to Wuhan are at your cost, and we do not book the collection on our account for this one.
  • Special-order and sourced items are excluded. If the part was bought in specifically for you, or built to your specification, it cannot be returned this way.

Where the two processes divide

On a valid warranty claim the return freight is ours, because the failure is ours. A change of mind is the other case: the unit works as it was described, and the cost of moving it sits with the buyer. If you are not sure which one you have, describe the fault in the first email and we will name the process before anything is shipped. An unmarked parcel gets held in customs either way.

08 · Start a claim

Four things to put in the first email

  • Model number and serial number, from the nameplate
  • Invoice or proforma number, and the date on it
  • What the unit does now, and what it should do
  • Photos: nameplate, the installation, and any fault code on the display

If the unit is on a line that cannot stop, write "line down" in the subject line. Those emails are read before the queue.

Version 2026-11 · applies to orders invoiced from 1 November 2026 · the version attached to your proforma invoice governs.

Need the same part again, or a spare on the shelf?

Buying a second unit before the first one fails is cheaper than a warranty claim in the middle of a shutdown. Send the model and quantity.

WhatsApp Request a Quote
WhatsApp