09 models listed
Endress+Hauser · Process Instruments
Endress+Hauser instruments are the most order-code-sensitive products we sell: the same family can differ in wetted material, process connection, output and hazardous-area approval. We stock the transmitter and sensor families that appear most often on maintenance lists and quote from the complete order code, so the instrument that arrives fits the nozzle and the certificate the area requires.
Most of what leaves here is a single instrument replacing one that failed on a skid or a tank rather than a project order, so the packing is sized for a courier and the calibration certificate travels with the unit. Where the nozzle dimensions need checking before ordering, we ask for the drawing instead of guessing from the model code.
What is on the shelf for Endress+Hauser Instruments
Of the 9 Endress+Hauser Instruments numbers listed below, 5 are in stock in Wuhan today and the rest are sourced against a confirmed lead time. Level, pressure and differential pressure, flow, and temperature are all covered, because an instrument order usually mixes them — one failed transmitter rarely arrives on its own.
The order code is decoded against the nameplate before anything is quoted: range, connection and wetted material are what separate two similar model numbers. The unit is then loop-tested at five points through a reference meter, with the same points read back over HART.
| Series | Models | In stock |
|---|---|---|
| Promag | 2 | 1 |
| iTEMP | 2 | 1 |
| Cerabar | 1 | 1 |
| Deltabar | 1 | 0 |
| Levelflex | 1 | 0 |
| Liquiphant | 1 | 1 |
| Prosonic | 1 | 1 |
Questions we get before an order
Can you supply a transmitter set to my range?
The unit ships set to the range in its order code. State the range you need on the request and it is checked at the five test points before packing.
What if the wetted material differs from the standard?
It is part of the order code, not an option added later. Send the full code from the nameplate and we quote the unit that matches it.
Do you supply the process connection and the seals?
The connection is in the code. Seals and gaskets are quoted separately when the existing ones cannot be reused — say so on the request and they are priced in.
-
PMP71-AA21BA1HAAA Cerabar PMP71 gauge transmitter, 0–10 bar, 4–20 mA HARTIn stock 48 h
-
PMD75-AAA7BA1HAAA Deltabar PMD75 differential transmitter, metal diaphragm, HARTIn transit 3–5 days
-
5PBB25-AADABBAA0B1A Promag P electromagnetic flowmeter, DN25, PTFE liner, 4–20 mAIn stock 48 h
-
5WBB50-AADABBAA0B1A Promag W electromagnetic flowmeter, DN50, hard rubber linerIn transit 3–5 days
-
FMR57-AAACCABDAX Levelflex FMR57 guided-wave level, 4–20 mA HART, rod probeIn transit 3–5 days
-
FMU30-AAHEAAGGF Prosonic FMU30 ultrasonic level, 0–8 m, 4–20 mAIn stock 48 h
-
FTL51B-AAA4AAAAA Liquiphant FTL51B point level switch, tuning fork, relay outputIn stock 48 h
-
TMT82-AAA1AA iTEMP TMT82 head transmitter, dual input, 4–20 mA HARTIn stock 48 h
-
TM411-A1A1A1AAA Omnigrad M TM411 RTD assembly with thermowell, Pt100 class ATo be sourced 7–10 days
Looking for a Endress+Hauser model we have not listed?
Only a fraction of the Endress+Hauser numbers we can supply are published here. Send the order code as printed on the module, plus the quantity and the application, and we will confirm stock, lead time and the exact successor if the original is discontinued.
A nameplate photo and the quantity is usually enough: email [email protected] or WhatsApp +86 182 0275 1913.
Not in the catalog? The same form sends it to a person — never to a 404.