ABB ACS580-01-05A7-4ACS580 general purpose drive, 2.2 kW
In transit In transit — lead time 3–5 days. Minimum order 1 piece, tested before packing.
Stock photo of this item code. The unit that ships may differ in options — ask for its own photo before you pay.
About this part
The 2.2 kW wall-mounted unit in ABB's general purpose ACS580 range: 5.7 A output at 380–480 V three-phase, IP21, Modbus RTU on board, STO built in. It is what most pump, fan and conveyor panels specify when a cabinet-built ACS880 would be more drive than the application needs.
Replacing a drive is rarely about the power rating alone. The parameter set from the old unit, the macro it was commissioned with and whether the panel is the assistant or the basic type decide how long the swap takes. If the failed drive still powers up, we export its parameter list before dispatch, so the replacement can be loaded instead of re-commissioned by hand.
| Series | ACS580 |
|---|---|
| Type | Wall-mounted general purpose drive, frame R1 |
| Rated power | 2.2 kW (3 hp) normal use / 1.5 kW heavy duty |
| Output current | 5.7 A (In) / 4.0 A heavy duty |
| Input | 3-phase 380–480 V, 47.5–63 Hz |
| Output frequency | 0–500 Hz |
| Motor control | Scalar and sensorless vector; STO (Safe Torque Off) built in |
| Fieldbus | Modbus RTU (EIA-485) on board; PROFIBUS, EtherNet/IP, CANopen via option module |
| Degree of protection | IP21 / NEMA 1, wall mount |
| Ambient temperature | −15…+50 °C, derate above 40 °C |
| Net weight | 4.6 kg |
| Country of origin | Finland or China, by production batch — confirmed before dispatch |
Ratings are ABB's published values for this type code. The drive is ordered by type code, not by kW alone: check the motor nameplate current against 5.7 A before confirming.
Compatibility and replacement path
Models below share the slot, the loop or the engineering environment. Where the swap is not a drop-in, the reason is written next to it rather than left for commissioning day.
Compatible with
- ACS580-01-06A9-4Next current step in the same family. Use it when the motor nameplate current sits above 5.7 A; confirm terminal and mounting dimensions against the drawing first.
- ACS355-03E-08A8-4Machinery drive of the same 2.2 kW class. Different parameter structure and no STO as standard — this is a control-panel rewrite, not a drop-in.
- ACS880-01-09A4-4The industrial family. Choose it when the duty needs heavy overload or a higher ambient; the cabinet footprint and wiring are larger.
Supersedes — what this model replaced
- ACS550-01-05A4-4The general purpose family ACS580 replaced. Same 2.2 kW class; parameter numbers and terminal layout differ, so send the old parameter list with the order.
Replaced by — what comes after it
None — this type code is current. ABB's industrial successor for new designs is the ACS880, which is a different frame and not a drop-in for this one.
Supply, testing and documents
How we verify this model before it ships
- Parameters first: if the drive still powers up, the customer parameter set is exported and attached to the test sheet, so the replacement can be loaded rather than re-commissioned from defaults.
- Load test on a 400 V bench with a test motor: output current per phase, DC bus voltage, heatsink and fan sensors, fault log read and cleared.
- I/O and fieldbus: digital inputs forced, relay outputs measured, Modbus RTU polled from a test master at the address printed on the sheet.
- Mechanical: fan free-running, heatsink fins cleaned, cover and keypad retaining clips intact, terminal screws torqued and marked.
Packing
Double-wall carton with foam end caps; keypad fitted, terminal covers in place, parameter printout in a sleeve on top. Orders above five units are palletised and strapped.
Export documents
Commercial invoice, packing list with serial numbers, HS code 8504.40, and the parameter export where one exists. DDP or CIF, your choice at quote stage.
Questions buyers ask about this model
Is it new or refurbished?
Some ACS580 stock is a tested pull from decommissioned panels. Those units are cleaned, the fan and heatsink serviced, run on a test motor and sold with the same 12-month warranty — and they are labeled 'tested pull' on the quote. If the job only accepts new-in-box, say so and we quote only that.
Can you load my parameter set?
Yes. Send the Drive Composer file, or a photo of the old keypad's parameter list, and we load it before dispatch. Units that arrive pre-loaded are usually running within the hour instead of a full commissioning session.
Can you ship DDP?
Yes, DDP to most destinations, or CIF / FOB Wuhan. Drives are heavy for their size, so we quote air and sea separately and show the duty and VAT as separate lines.
Why is this one 3–5 days when others are 48 hours?
This unit is in transit to Wuhan, not on the shelf. The 3–5 days run from landing, not from your inquiry. If you need it sooner we check partner stock in Europe and quote that as a separate option rather than promise a date we cannot hold.
Do I need the keypad?
The drive runs without one once commissioned, but you cannot set parameters or read faults without it. Assistant and basic panels are both available — tell us which one the panel design has room for.
Request a price for this part
Six fields, pre-filled with the model. You get unit price, condition, incoterm and the day it can leave Wuhan — within 4 working hours, Monday to Friday 09:00–18:00 CST.
ACS580-01-05A7-4Quoting several parts? Use the list form — it takes one number per line.
Related models
Request a quote for multiple items- ACS580-01-026A-4 General purpose drive, 11 kW, 400 V, 26 A, assistant control panel In stockRequest price
- ACS880-01-09A4-4 Wall-mount drive, 3 kW, 400 V, 9.4 A, built-in choke In stockRequest price
- ACS355-03E-08A8-4 Machinery drive, 2.2 kW, 400 V, 8.8 A, vector control In transitRequest price
- ACS880-01-145A-3 Wall-mount drive, 75 kW, 400 V, 145 A, for pump and fan duty To be sourcedRequest price
- ACSM1-04AS-07A0-4 Servo drive, 7 A, 400 V, single-axis, with motion control option In transitRequest price
Can’t find it? Send us the model number.
Most of what we ship is not listed here. Type the number from the nameplate and we check the shelf, the in-transit line and our supplier pool in one pass — including the previous-generation number it replaced and what has to change if it did.
A nameplate photo and the quantity is usually enough: email [email protected] or WhatsApp +86 182 0275 1913.
Not in the catalog? The same form sends it to a person — never to a 404.