10 models listed
Siemens · PLC & DCS Parts
Siemens PLC stock is concentrated on the controllers and I/O that still run packaging, water and process lines across Europe and Southeast Asia. S7-1500 CPUs and ET 200SP modules are held in the most depth because they are current and fail without warning; S7-300 and S7-400 parts are held because they are no longer sold new and a failure leaves no factory option.
Order codes are listed in full, including the suffix, so the part you receive matches the one you are replacing. Where a CPU has failed and the S7-300 line is closed, we quote both paths — the original part while it lasts, and the migration kit — so the choice stays with you rather than with us.
What is on the shelf for Siemens PLC/DCS
Of the 10 Siemens PLC/DCS numbers listed below, 5 are in stock in Wuhan today and the rest are sourced against a confirmed lead time. Depth sits in CPUs and I/O modules, because that is where a line stops: a failed CPU or a single I/O card takes the station down, while a rack or a power supply usually gives warning first.
Modules are read on the nameplate first — order code, hardware revision, firmware — then powered on a 24 V bench and the diagnostic buffer read and cleared before packing. An older CPU revision quoted against a newer order is the mismatch this check exists to catch.
| Series | Models | In stock |
|---|---|---|
| S7-1500 | 4 | 4 |
| S7-300 | 2 | 0 |
| S7-400 | 2 | 0 |
| ET 200SP | 1 | 0 |
| S7-1200 | 1 | 1 |
Replacement routes we have on file
Where a model above has a documented predecessor, the note records what the swap changes — footprint, terminals, firmware — so the comparison is made before the order rather than after it.
- 6ES7513-1FL02-0AB0 supersedes 6ES7513-1FL01-0AB0 — Previous step. Same footprint and terminal assignment, firmware one revision earlier.
- 6ES7513-1FL02-0AB0 supersedes 6ES7513-1FL00-0AB0 — First release of the 1513F. Electrically a direct swap; projects built for the earliest firmware may need recompiling.
Questions we get before an order
Can you still supply an S7-300 CPU?
While stock lasts. The range is out of sale, so these units are new surplus or tested pulls; where none is left we quote the S7-1500 replacement and list what changes around it — modules, wiring and program blocks.
What do you need from me to quote a CPU?
The order code exactly as printed on the module, the quantity, and the rack it goes into. If the CPU is dead, a photo of the nameplate is enough — we do not need the program to price a replacement.
Is the firmware revision part of the quote?
Yes. Order code, hardware revision and firmware are read off the label and stated on the quote, so you can compare them with the unit you are replacing before you order.
-
In stock 48 h
-
6ES7214-1AG40-0XB0
CPU 1214C DC/DC/DC, 14 DI / 10 DO, 2 analog inputs
In stock 48 h -
6ES7315-2AH14-0AB0
CPU 315-2 DP, 256 KB, MPI and PROFIBUS DP master
In transit 3–5 days -
6ES7416-3XS07-0AB0 CPU 416-3 PN/DP, 16 MB, for rack-based S7-400 systemsTo be sourced 7–10 days
-
6ES7521-1BL00-0AB0
Digital input module, 32 channels, 24 VDC, high feature
In stock 48 h -
6ES7522-1BL01-0AB0
Digital output module, 32 channels, 24 VDC / 0.5 A, standard
In stock 48 h -
6ES7155-6AU01-0BN0
Interface module IM 155-6 PN ST, up to 64 I/O modules
In transit 3–5 days -
6ES7331-7KF02-0AB0
Analog input, 8 channels, 12 bit, current and voltage
In transit 3–5 days
-
6ES7407-0KA02-0AA0 Power supply PS 407, 120/230 VAC to 5 VDC 10 ATo be sourced 7–10 days
-
6ES7590-1AB60-0AA0 Aluminum mounting rail, 160 mm, for compact CPU stationsIn stock 48 h
Looking for a Siemens model we have not listed?
Only a fraction of the Siemens numbers we can supply are published here. Send the order code as printed on the module, plus the quantity and the application, and we will confirm stock, lead time and the exact successor if the original is discontinued.
A nameplate photo and the quantity is usually enough: email [email protected] or WhatsApp +86 182 0275 1913.
Not in the catalog? The same form sends it to a person — never to a 404.
