CHENFENGIntelligent Control

Siemens 6ES7513-1FL02-0AB0SIMATIC S7-1500F CPU 1513F-1 PN

In stock In stock in Wuhan — dispatches within 48 h. Minimum order 1 piece, tested before packing.

Siemens 6ES7513-1FL02-0AB0 — product photo

Stock photo of this item code. The unit that ships may differ in options — ask for its own photo before you pay.

About this part

The 1513F-1 PN is the fail-safe member of the S7-1500 line: standard control logic and the F-program run on the same unit, so a machine with an emergency-stop circuit does not need a second controller next to it. This order code is the 450 KB / 1.5 MB version at hardware FS03, firmware V2.9.

Two things decide whether a 1513F will run in your cabinet: the hardware functional status printed after the MLFB, and whether your TIA Portal version accepts the firmware on the unit. We read both from the nameplate before quoting, and we say so when the only unit available is a step your project cannot open. The SIMATIC Memory Card is required to operate the CPU and is not part of it — order one separately if the failed unit's card is being replaced rather than reused.

Key specifications
SeriesSIMATIC S7-1500F
TypeCPU 1513F-1 PN, fail-safe (F-CPU)
Work memory450 KB program / 1.5 MB data
Bit performance40 ns
Interface1 × PROFINET IRT, 2-port switch (RJ45)
ProtocolsPROFINET IO, PROFIsafe, TCP/IP; OPC UA server/client with license
Onboard I/ONone — signal modules on the rack or ET 200MP/SP over PROFINET
Supply24 V DC (19.2–28.8 V), 0.7 A rated / 0.95 A max
Memory cardSIMATIC Memory Card required, up to 32 GB
Safety ratingSIL 3 (IEC 61508) / PL e (ISO 13849-1)
Degree of protectionIP20
Dimensions35 × 147 × 129 mm (W × H × D)
Net weightapprox. 0.4 kg
Country of originGermany — confirmed per unit on the packing list

Values come from the manufacturer's published data for this order code. Batch-dependent figures — country of origin, hardware FS, firmware version — are read from the unit before dispatch and printed on the packing list.

Compatibility and replacement path

Models below share the slot, the loop or the engineering environment. Where the swap is not a drop-in, the reason is written next to it rather than left for commissioning day.

Compatible with

  • 6ES7513-1AL02-0AB0Standard (non-F) 1513 with the same memory split. Fits the same slot when no safety program is used; an F-program will not compile on it.
  • 6ES7513-1FL01-0AB0Earlier hardware and firmware step of the same F-CPU. Same width and wiring — check that the project's firmware version is not higher than the unit's.
  • 6ES7155-6AU01-0BN0ET 200SP interface module, the distributed I/O most 1513F stations are built with. Connects over the same PROFINET port.
  • 6ES7590-1AB60-0AA0160 mm mounting rail shared across the compact station. Check the module count if the failed rack was longer.

Supersedes — what this model replaced

  • 6ES7513-1FL01-0AB0Previous step. Same footprint and terminal assignment, firmware one revision earlier.
  • 6ES7513-1FL00-0AB0First release of the 1513F. Electrically a direct swap; projects built for the earliest firmware may need recompiling.

Replaced by — what comes after it

  • 6ES7513-1FM03-0AB0900 KB program / 2.5 MB data, FS04, firmware V4.1. Same 35 mm width, but it needs a newer TIA Portal version and the safety program has to be recompiled and re-validated.

Supply, testing and documents

How we verify this model before it ships

  1. Nameplate first: MLFB, hardware FS and firmware are read off the front label and matched against the order code. Quoting a 1FL01 as a 1FL02 is the most common mismatch on this CPU.
  2. Power-up on a bench supply: 24 V DC applied, display and LEDs checked, diagnostic buffer read and cleared of transport faults.
  3. Interface test: both PROFINET ports checked for link, firmware version read over the network, a test device pinged through the internal switch.
  4. Memory card seat inspected and a known card read — a bent pin there stays invisible until commissioning day.

Packing

Anti-static bag inside a foam-lined carton, in the original Siemens box where we have it. A memory card, if ordered, travels in its own sleeve in the same carton — never loose against the housing.

Export documents

Commercial invoice, packing list with serial number, HS code 8537.10, certificate of origin on request. DDP or CIF, whichever you state on the quote.

Questions buyers ask about this model

Is this a new unit or a used pull?

Both are possible and the quote says which. New surplus arrives in the original packaging with the factory label intact. A tested pull is labeled as such, ships with our test record and carries the same 12-month functional warranty. We do not describe a pull as new.

Can you send a test report with the CPU?

Yes. Every controller leaves with a one-page record: supply voltage, current draw, port link status, firmware version and the diagnostic buffer read-out. Ask for it on the quote and it is included at no extra charge.

Can you ship DDP?

Yes, DDP to most of Europe, North America and Southeast Asia, or CIF / FOB Wuhan if you clear import yourself. Duty and VAT are shown separately on the quote so the landed cost is visible before you confirm.

How is the lead time confirmed?

The 48-hour figure is the dispatch window from our Wuhan warehouse, not transit. If the unit is in transit rather than on the shelf, we give the date it lands and dispatch the day it passes the test. Transit is typically 3–6 working days by DHL or FedEx express.

Does it come with a SIMATIC Memory Card?

No — the card is ordered separately and the CPU will not run without one. Send the TIA Portal archive and we can load it onto a card before dispatch, or supply a blank card in the same shipment.

Request a price for this part

Six fields, pre-filled with the model. You get unit price, condition, incoterm and the day it can leave Wuhan — within 4 working hours, Monday to Friday 09:00–18:00 CST.

6ES7513-1FL02-0AB0

Quoting several parts? Use the list form — it takes one number per line.

Part 6ES7513-1FL02-0AB0

A photo of the nameplate answers the suffix question faster than any description. Attach it to the reply or send it on WhatsApp.

Nothing is charged at this stage. Reply within 4 working hours, CST 09:00–18:00. Prefer email? [email protected].

Can’t find it? Send us the model number.

Most of what we ship is not listed here. Type the number from the nameplate and we check the shelf, the in-transit line and our supplier pool in one pass — including the previous-generation number it replaced and what has to change if it did.

A nameplate photo and the quantity is usually enough: email [email protected] or WhatsApp +86 182 0275 1913.

Not in the catalog? The same form sends it to a person — never to a 404.

WhatsApp Request a Quote
WhatsApp