CHENFENGIntelligent Control

Selection & comparison 2026-11-04 6 min read

S7-1200 or S7-1500: how to choose the CPU before the panel is cut

Eight signal modules, no PROFIBUS and roughly 100 KB of program is where the compact controller stops being the cheap choice.

Definition

The S7-1200 is a compact controller with up to eight signal modules and no PROFIBUS port; the S7-1500 is a modular controller with up to 32 modules, a diagnostics display and a rack that scales past a thousand I/O points.

The short answer

Specify the S7-1200 while the machine is self-contained and the rack stays under eight modules. Specify the S7-1500 the moment the plant speaks PROFIBUS, the program passes roughly 100 KB, or a second integrator will expand the line later.

  • 8signal modules max on a 1200
  • 32modules max on a 1500 rack
  • 0PROFIBUS ports on any S7-1200
01

When it fits, and when it does not

Both controllers are current, both program in TIA Portal, both speak PROFINET, and both will run a conveyor. That is why the choice looks cosmetic until the panel is built and the first expansion arrives. The differences that cost money are not in the instruction set. They are in the ceiling.

The rule we give buyers is mechanical: count the modules, count the protocols, then look at what the machine will be asked to do in five years. A 1200 that runs out of rack becomes a 1500 purchase plus a redrawn panel, bought twice.

Which controller fits the project in front of you
If the project looks like thisSpecifyBecause
Standalone machine, under 100 I/O, one motor groupS7-1200, CPU 1214C or 1215COnboard 14 DI and 10 DO absorb the first cabinet before you buy a module
Machine that must join a plant PROFIBUS segmentS7-1500 with CM 1542-5, or a 1516-3 PN/DPNo S7-1200 CPU or module can be a DP master. There is no workaround, only a different CPU
Line a second integrator will expand in three yearsS7-1500 from CPU 1513 up32 module slots, remote I/O over PROFINET, memory for added axes
Program that will pass roughly 100 KB of codeS7-1500 from CPU 1513 upThe 1200 tops out at 150 KB, and you meet that ceiling during commissioning, not during quoting
Existing S7-300 code in STL or GRAPHS7-1500STL and GRAPH still exist on the 1500; the 1200 has neither, so legacy code has to be rewritten
Machine that must expose tags to MES over OPC UAS7-1500Full OPC UA server and client with the complete data model, no gateway between

Six questions. If two answers land in the right column, the CPU is decided and the rest is BOM work.

02

Key differences

The table below is what we walk through on the phone. The module count, PROFIBUS, program size and panel width rows decide most projects; the rest are for the integrator writing the program.

S7-1200 and S7-1500 on the points that change a project
ItemS7-1200S7-1500What it means on site
CPU range1211C to 1217C, plus the G2 generation1511 to 1518, plus T, F, R and H variantsThe 1500 starts where the 1200 ends
Work memory30 to 150 KB depending on CPU300 KB code, 1.5 MB data on 1513-1 PNCode and data are separate budgets on the 1500
Central modules8 signal modules plus 3 communication modules32 modules per rackThe 1200 ceiling arrives at the ninth module
Onboard I/O14 DI, 10 DO, 2 AI on a 1214CNone, except the compact 1511C and 1512CA 1200 starts cheaper on small point counts
PROFIBUS DPNone, and no module existsIntegrated on 1516, 1517, 1518; CM 1542-5 for the restThe most expensive surprise in this comparison
PROFINET1 port, 2 on 1215C and 1217C2 ports with an integrated switchLine topology without an external switch
LanguagesLAD, FBD, SCLLAD, FBD, SCL, STL, GRAPHLegacy STL ports to the 1500 only
MotionPTO and analog, basic positioningIntegrated motion control, T-CPU for kinematicsCamming and gearing need the 1500
OPC UALimited; a server arrives with G2Server and client, full data modelMES integration without a gateway
DiagnosticsLEDs onlyFront display plus web serverFault finding without opening a laptop

Figures from the S7-1200 and S7-1500 system manuals, checked against order data in October 2026. Module counts are central-rack figures.

03

What to specify, in order

Count modules, not I/O points

Take the point list, add 30 percent for what the customer forgot, divide by channels per module, then add one communication module and one spare slot. If the answer is eight or more, the CPU is already decided and the model only sets the price.

Ask what the plant already speaks

A DP segment, an S7-300 with DP slaves, or a remote rack on PROFIBUS is a hard stop for the 1200. Either the CPU becomes a 1500 with CM 1542-5, or the segment is converted to PROFINET, which is a separate project with its own budget.

Budget memory at twice the old program

Migration adds code: diagnostics, safety, interlocks that used to live in relays. A 120 KB S7-300 program lands near 200 KB after migration, which fits a 1513 comfortably and does not fit a 1215C. Size for year three, not for commissioning day.

Price the rack, not the CPU

A fully loaded 1200 rack with eight modules, a supply and the extra terminals can pass a 1511 rack. Compare complete bills of material, including rails, front connectors and shielding, before calling the 1200 the cheap option.

04

Common pitfalls

  • The S7-1200 cannot do PROFIBUS. At all.

    No communication module, no board, no firmware option. If one DP slave has to be reached, the CPU changes. We have seen this found after the panel was cut, which makes it a cabinet rebuild rather than a part swap.

  • First-generation and G2 S7-1200 do not mix

    G2 CPUs need TIA Portal V20 or later, and first-generation signal modules do not sit in a G2 rack. Ordering a G2 CPU against a stock of G1 modules produces a rack that will not assemble.

  • Front connectors are a separate order

    S7-1500 modules ship without them: screw or push-in, 20 or 40 pin, one per module. A rack that arrives without connectors cannot be wired, and it is the most common reason a kit sits on the floor for a week.

  • Code and data memory fail differently

    Exceed code work memory and the download is refused. Exceed data work memory and the program runs, then loses retentive values on power-down. The second failure is the one that reaches production.

  • A 1513F is not the automatic replacement for a 315-2DP

    The F variant carries safety overhead in price and program structure. If the plant has no fail-safe I/O, the standard 1513-1 PN is the correct mapping and the F CPU is certification nobody asked for.

05

Questions we get on the quote desk

Can I use S7-1200 signal modules on an S7-1500?
No. The 1200 uses its own I/O modules; the 1500 uses ET 200MP modules, or ET 200SP over PROFINET. The two families are mechanically and electrically different and no adapter exists.
Is the S7-1200 always cheaper for a small machine?
For a standalone machine with 40 to 60 points, yes, and the saving is real: fewer modules, a smaller panel, no memory card. The 1500 wins the comparison back as soon as a second cabinet, a DP segment or an MES interface appears.
Does a 1500 need a memory card?
Yes. The S7-1500 runs from a SIMATIC memory card ordered separately, and it is not the S7-300 MMC. The S7-1200 has internal load memory and treats the card as optional.
06

The models this guide names

Still deciding

Send the model number. We answer with a price, a condition and a date.

One line per part is enough. Quote back within 4 working hours, Monday to Friday 09:00–18:00 CST. No account, no minimum quantity, no obligation.

WhatsApp Request a Quote
WhatsApp